The Beatbot Sora 70 is a premium cordless robotic pool cleaner designed for in-ground and above-ground swimming pools. It is designed to clean the pool floor, walls, waterline, water surface and shallow areas, providing substantially broader coverage than conventional floor-and-wall robotic cleaners.
The Sora 70 combines a rechargeable lithium-ion battery, intelligent navigation, ultrasonic obstacle detection, app connectivity and multiple cleaning modes. Its cordless design eliminates the need for a floating power cable, while its large-capacity debris basket is designed for extended cleaning sessions.
Key Features
- Type: Cordless robotic pool cleaner
- Pool Type: In-ground and above-ground
- Cleaning Coverage: Floor, walls, waterline, water surface and shallow areas
- Maximum Pool Coverage: Up to approximately 300m²
- Floor Cleaning Time: Up to approximately 5 hours
- Surface Cleaning Time: Up to approximately 7 hours
- Charging Time: Approximately 4.5 hours
- Battery: 10,000mAh lithium-ion
- Debris Basket: 6L
- Standard Filter: 150µm
- Optional Fine Filter: Up to 3µm
- Control: Beatbot App + Bluetooth
- Connectivity: 2.4GHz / 5GHz Wi-Fi + Bluetooth
- Cleaning Modes: Pro, Floor, Surface, Standard and ECO
- Navigation: SonicSenseâ„¢ intelligent obstacle avoidance
- Retrieval: Automatic surface parking / smart retrieval
- Waterproof Rating: IPX8
- Cleaner Weight: Approximately 10.5kg
- Dimensions: Approximately 43.4 × 42.9 × 28.4cm
- Operating Depth: Approximately 20cm–3.5m
- Water Temperature: Approximately 5°C–40°C
- Maximum Salt Concentration: Up to approximately 5,000ppm
- Charging Power: 65W
Full-Coverage Cordless Pool Cleaning
The Sora 70 is designed to provide five-area cleaning coverage:
- Water surface
- Shallow areas and platforms
- Pool floor
- Pool walls
- Waterline
This makes it more than a conventional robotic pool vacuum. In Pro Mode, the cleaner is designed to automatically work across these areas as part of a comprehensive cleaning cycle.
One Cordless Robot. Five Cleaning Areas.
Floor. Walls. Waterline. Shallow Areas. Water Surface.
The cordless design also removes the need for a power cable floating around the pool, reducing cable tangling and making setup simpler.
Floor, Walls & Waterline Cleaning
The Sora 70 uses multiple motors and intelligent navigation to move across the pool floor and climb suitable pool walls.
It is designed to clean:
- Pool floor
- Pool walls
- Waterline
- Shallow platforms
- Water surface
The cleaner’s intelligent navigation system is designed to optimise its cleaning route rather than repeatedly travelling randomly around the pool.
Water Surface Cleaning
One of the Sora 70’s key differentiating features is water-surface cleaning.
Instead of limiting cleaning to submerged pool surfaces, the Sora 70 can operate at the water surface to collect floating debris such as:
- Leaves
- Insects
- Floating debris
- Surface contaminants
Its JetPulseâ„¢ technology helps direct floating debris towards the cleaner for collection.
This can reduce the amount of manual surface skimming required between pool-cleaning cycles.
Shallow Area & Platform Cleaning
The Sora 70 is designed to operate in water as shallow as approximately 20cm.
This allows it to clean certain:
- Shallow ledges
- Platforms
- Baja shelves
- Shallow-entry areas
For pool owners with modern pools containing tanning ledges or shallow platforms, this provides an important advantage over robots designed primarily for conventional pool floors.
Intelligent Navigation
The Sora 70 uses SonicSenseâ„¢ intelligent sensing technology to help detect obstacles and navigate around the pool.
The system uses multiple sensors, including ultrasonic sensing, to identify obstacles and improve navigation.
The cleaner uses intelligent cleaning patterns, including S-shaped routes, to help provide more systematic pool coverage.
This is particularly useful in pools with:
- Steps
- Ledges
- Pool furniture or obstacles
- Irregular shapes
- Curved walls
- Freeform layouts
Beatbot App
The Sora 70 can connect to the Beatbot App through Wi-Fi and Bluetooth.
The app provides access to cleaner controls and operating information, allowing users to manage cleaning without manually operating the robot.
Depending on the operating mode and software version, the app can provide functions such as:
- Cleaning-mode selection
- Cleaning control
- Robot status
- Battery information
- Cleaning-cycle information
- Firmware/software updates
- Smart-control functions
The Sora 70 supports 2.4GHz and 5GHz Wi-Fi connectivity.
Cleaning Modes
The Sora 70 provides multiple cleaning modes designed for different pool-cleaning requirements.
Pro Mode
Designed for comprehensive cleaning across the pool.
It can cover:
- Water surface
- Shallow areas
- Floor
- Walls
- Waterline
Floor Mode
Designed specifically for cleaning the pool floor.
This is useful when the main requirement is removing accumulated dirt, sand and debris from the bottom of the pool.
Surface Mode
Designed specifically for collecting floating debris from the water surface.
Standard Mode
Provides a general-purpose cleaning cycle for routine pool maintenance.
ECO Mode
Designed for lighter or more energy-conscious cleaning requirements.
6L Large-Capacity Debris Basket
The Sora 70 features a 6-litre debris basket, providing substantial debris capacity.
The larger basket is particularly useful for Australian pools exposed to:
- Eucalyptus leaves
- Gum leaves
- Tree debris
- Insects
- Sand
- General outdoor debris
A larger basket means the cleaner can collect more debris before requiring manual emptying.
The basket should be emptied and rinsed regularly to maintain optimum water flow and cleaning performance.
Filtration
The standard Sora 70 filtration system uses approximately a 150-micron filter.
This is suitable for capturing common pool debris such as:
- Leaves
- Insects
- Hair
- Sand
- Larger dirt particles
An optional ultra-fine 3-micron filter is also available for customers who require finer particle filtration.
The optional fine filtration can be particularly useful after:
- Dust storms
- Heavy pollen periods
- Fine sediment contamination
- Environmental debris entering the pool
Long Battery Runtime
The Sora 70 incorporates a 10,000mAh rechargeable lithium-ion battery.
Beatbot specifies up to approximately:
5 hours of floor cleaning
and up to approximately:
7 hours of surface cleaning
Actual operating time will vary depending on the cleaning mode, pool configuration, wall climbing, debris load and operating conditions.
Charging
The Sora 70 uses a 65W charging system.
A complete recharge takes approximately 4.5 hours under specified conditions.
For normal residential use, this allows the cleaner to be charged between cleaning cycles rather than requiring a permanent power connection beside the pool.
Smart Surface Parking & Retrieval
One of the practical features of the Sora 70 is its ability to return to the water surface.
After completing its cleaning operation, the cleaner can move towards the surface, making it easier for the owner to retrieve it.
This is particularly useful because the robot weighs approximately 10.5kg.
The smart retrieval function reduces the need to manually search for the robot at the bottom of the pool.
Pool Compatibility
The Sora 70 is designed for a wide range of swimming pools.
It can be used with:
- In-ground pools
- Above-ground pools
- Rectangular pools
- Round pools
- Kidney-shaped pools
- Freeform pools
- Pools with shallow platforms
Compatible pool surfaces include:
- Concrete
- Ceramic/tile
- Fibreglass
- Vinyl
- Other suitable pool surfaces
For Australian customers, the cleaner is also designed for saltwater pools within the manufacturer’s specified salt concentration limits.
Pool Suitability
The Sora 70 is particularly well suited to Australian residential pools where outdoor debris can be a significant maintenance issue.
Typical debris includes:
- Eucalyptus leaves
- Gum leaves
- Fine dust
- Sand
- Insects
- Pollen
- General garden debris
The combination of 6L debris capacity, cordless operation, long battery life and water-surface cleaning makes the Sora 70 suitable for larger residential pools where frequent manual cleaning would otherwise be required.
Why Buy the Beatbot Sora 70?
- Cordless operation
- Cleans floor, walls and waterline
- Cleans the water surface
- Cleans suitable shallow areas and platforms
- Up to 5 hours floor runtime
- Up to 7 hours surface runtime
- Large 6L debris basket
- 10,000mAh lithium-ion battery
- Intelligent SonicSenseâ„¢ navigation
- Multiple cleaning modes
- Beatbot App connectivity
- 2.4GHz / 5GHz Wi-Fi
- Bluetooth connectivity
- Smart surface retrieval
- Optional 3µm ultra-fine filtration
- Suitable for many pool shapes
- Suitable for in-ground and above-ground pools
- IPX8 waterproof construction
- Designed for demanding outdoor pool environments
What’s Included
A typical Sora 70 package includes:
- Beatbot Sora 70 robotic pool cleaner
- Charging equipment
- Standard filter/debris basket
- User documentation
- Accessory equipment supplied with the product.
- 3-YEAR WARRANTY
Reviews
There are no reviews yet.